Description
Includes Full-Size Brass Shaft A500K potentiometers for Volume and Tone with 0.022uf Capacitors, modern Gibson wiring layout, Duncan treble bleed mod on Volumes.
Includes all the necessary nuts and washers. Controll knobs not included, please purchase them separately if you need
This is a complete wiring assembly for SG style guitars where the Jack, Switch and Potentiometers all share a routing cavity so there is no need to feed wires through and solder them, everything is already soldered up. You will need to solder the grounds of your pickups to the top of the volume pot, the hot of your pickups to the input lug of the volume pot and there should be a ground wire coming from your bridge post that must be soldered to the top of the pot too.
We sell a different wiring harness for guitars like Les Pual Standards, where the switch is separate from the rest of the electronics since the switch needs to be installed at the top of the guitar, with 50cm wire length to feed through the cavity to get to the potentiometers and jack. Please purchase that one if your electronics are separated by a different cavity routing.
Please note when ordering custom pickguard wiring or electronic assemblies, add an extra 24 – 48 hours to the lead time.
Reviews
There are no reviews yet.