Prewired Pickguard Loaded with Karman Vintage Pro Pickups – White

R1,799.00

In stock

Description

A high quality pickguard with a Karman Vintage Style 5 way switch and Full Sized Brass Shaft Potentiometers. Complete with pickups and electronics installed and connected, all you need to do is disconnect your old pickguard from output jack and connect this pickguard (solderless or solder-in options available) and screw the pickguard to the body of the guitar (screws can be ordered separately)

 

Please note – You would need to add an extra 24 – 48 hours to the lead time when ordering our prewired pickguards as we make them specially for each order. 

 

Pickups: Karman Vintage Pro Pickups. Comes with staggered pole pieces.
  • Neck 7.2k
  • Middle 7.3k
  • Bridge: 7.4k

Wiring: Vintage Cloth Wiring
Potentiometers: Full sized brass shaft potentiometers are used, either flat top or concave, which ever we have available at the time. We use  Audio Taper (A250k) for Volume with Treble Bleed Mod installed and A250K for Tones with 0.047uF High quality Capacitor, neck and middle pickups are connected to the first tone and bridge is connected to the other tone. (other custom wiring options available – email us with your request)
Pickguard colour: White (other colours are extra – email us with your custom request)
Knobs, Pickup covers and Switch tip colours: White (other colours are available for custom orders – email us with your custom request)
Solderless or Solder-in: This prewired pickguard comes standard with Solder-in, all wires you need to solder to your output jack and ground wire for tremolo claw are connected, you must just solder them to the parts. Solderless is an option too and comes with a terminal block on top of the volume potentiometer that you can connect your ground wires in the one terminal and hot from output jack to the other with a small flat screwdriver. If you want this pickguard completely solderless please email us or mention it in th order notes.
Instructions for installation will be included.

PLEASE NOTE: This pickguard is the exact layout and spec as USA/MEX Strat, it will fit Squier too, though sometimes the screw holes won’t line up 100 percent and you must make new ones. It may fit other guitars with some retrofitting, but we can not guarantee this since there are too many variations of the Strat. Also take note that the switch is larger than the cheaper import switch which may require some extra routing to your body where the switch goes depending on your routing depth (35mm is required) some guitars like Bullet and Affinity Squier have very shallow routing.  By purchasing this prewired pickguard we will assume you have removed your current pickguard and checked your routing cavity and we will also assume you are willing to make some modifications if your guitar does not have the same mounting layout as standard USA/MEX Fender.

Additional information

Dimensions 10 × 5 × 5 cm
Colour

Black, Vintage White, White

Conidion

New

Solderless Or Solder-in

Solderless, Solder-in

Accessories Colour

White Plastics, Black Plastics, Ivory Plastics

Pickups

KS12, KS15, KS25

Tone Knob 1

Neck, Neck and Middle

Tone Knob 2

Middle, Middle and Birdge, Bridge

Reviews

There are no reviews yet.

Be the first to review “Prewired Pickguard Loaded with Karman Vintage Pro Pickups – White”

Your email address will not be published. Required fields are marked *


You may also like…


css.php